Practice

ISO 45001 for Offices: What Clients Require

ISO 45001 for Offices: What Clients Require

ISO 45001 is a voluntary international standard for occupational health and safety management systems and is not mandatory for offices in Germany. In supplier questionnaires and tenders, clients usually do not ask offices for certification but for proof of the legal duties: the risk assessment under § 5 ArbSchG, the appointment of an occupational safety specialist under § 5 ASiG and safety training under § 12 ArbSchG.

This evidence belongs to the basic duties summarised in the overview of occupational safety in the office. Anyone who can present it complete and dated answers most questionnaires without a certificate. This article explains what ISO 45001 is, which documents clients actually request and when certification pays off for an office.

What ISO 45001 is and what it is not

ISO 45001 is the international standard "Occupational health and safety management systems", published in 2018 and adopted in Germany as DIN EN ISO 45001. It describes how a company plans, implements, reviews and improves its occupational safety. It does not replace any legal duty and does not create a new one.

An occupational safety management system is the defined organisation a company uses to regulate responsibilities, processes and reviews in occupational safety on a permanent basis. ISO 45001 follows the same basic structure as ISO 9001 (quality) and ISO 14001 (environment), with clauses 4 to 10 from "Context of the organisation" to "Improvement". Companies already certified to ISO 9001 will therefore recognise many elements.

ISO 45001 replaced the British standard OHSAS 18001, whose certificates have expired. Certification is carried out by an accredited certification body, accredited in Germany by DAkkS. A certificate is valid for three years, with annual surveillance audits in between.

Important for the assessment: ISO 45001 vs. statutory occupational safety is not an either-or. Clause 6.1.3 requires the company to determine its legal obligations, and clause 9.1.2 requires it to evaluate compliance. A certified office must therefore first meet exactly what ArbSchG, ASiG and DGUV Regulation 2 require anyway.

What clients actually require from offices

Most clients want to know whether an office has organised occupational safety under German law, not whether a certificate hangs on the wall. In questionnaires an ISO 45001 certificate is usually one answer option among others, and a hard exclusion criterion only for certain corporations and tenders.

Requirements differ by type of client. The overview below is based on typical questionnaires and tender documents and is not an exhaustive list.

Typical occupational safety requirements for offices by type of client
ClientTypical requirementCertificate mandatory?What an office provides
Corporation, supplier questionnaireQuestions on organisation, accidents, trainingrarelyRisk assessment, appointments, training records, accident figures
Public tenderSuitability evidence, self-declarationsrarelyClearance certificate from the Berufsgenossenschaft, self-declaration on compliance with occupational safety
Mid-sized client, framework agreementContract clause on compliance with regulationsnoConfirmation of the legal organisation on request
Work on the client's premisesProof of training, contact personnoTraining record, confirmation under § 8 ArbSchG
Corporation with its own management systemCertificate as supplier criterionsometimesISO 45001 certificate or equivalent evidence

The clearance certificate (Unbedenklichkeitsbescheinigung) is a confirmation from the Berufsgenossenschaft that the company is a member and has paid its contributions. The responsible Berufsgenossenschaft issues it on request. It has little to do with occupational safety itself, but tender procedures regularly ask for it together with the safety questions.

If your office works on a client's premises, for example for on-site consulting, § 8 ArbSchG also applies. What that means for both sides is explained in the article on coordinating contractors in an office building.

ISO 45001 and German law: where they overlap

An office that fully meets its legal duties has already covered a large part of the ISO 45001 requirements. Three elements are mainly new: management's occupational safety policy, the internal audit and the management review.

ISO 45001 clauses and their counterpart in German law
ISO 45001 clauseContentCounterpart in German law
5.4Consultation and participation of workersOccupational safety committee under § 11 ASiG, co-determination under § 87 para. 1 no. 7 BetrVG
6.1.2Hazard identificationRisk assessment under § 5 ArbSchG
6.1.3Determination of legal requirementsno separate duty, in practice a legal register
7.2 and 7.3Competence and awarenessTraining under § 12 ArbSchG, appointments under ASiG
7.5Documented informationDocumentation under § 6 ArbSchG
8.1.4Procurement and contractorsCooperation under § 8 ArbSchG
8.2Emergency preparednessFirst aid and emergency measures under § 10 ArbSchG
9.2 and 9.3Internal audit, management reviewno legal counterpart
10.2Incidents and corrective actionAccident report under § 193 SGB VII, effectiveness review under § 3 ArbSchG

The table shows the real additional effort: German occupational safety law has no internal audit and no management review. Both require dates, minutes and responsibilities that must be evidenced again every year.

Decision aid for three office sizes

Whether ISO 45001 pays off for an office depends less on headcount than on whether important clients make the certificate an exclusion criterion. The three examples show typical starting points; the sizes are assumptions, not thresholds from the standard.

Decision aid for ISO 45001 by starting point
OfficeStarting pointRecommendation
Tax advisory firm, 12 employeestwo questionnaires a year from mid-sized clientsno certificate, keep mandatory documents complete and audit-ready
IT service provider, 45 employeeswork at client sites, questionnaires from two corporationsno certificate, add training records and contractor confirmation
Engineering firm, 180 employeescorporate client requires ISO 45001 from the next framework agreementconsider certification, combine with ISO 9001 if in place

The cost of certification consists of the certification body's audit fees and internal effort. Under the binding document IAF MD 5, audit duration depends mainly on headcount and the risk of the activity, and offices fall into the lowest risk category. Certification bodies quote prices only on request; there are no reliable market averages.

The duties check shows which duties apply to your office in a few questions. The result is also the list of evidence a questionnaire can ask for.

Answering a supplier questionnaire in five steps

An occupational safety supplier questionnaire can be answered properly without a certificate if every question is matched to an existing document. The biggest mistake is a promise for the future ("will be introduced") that the client checks later.

  1. Classify the question. For each question, check whether it asks for a certificate, a management system or only proof of legal duties.
  2. Match the documents. Assign the existing document to each question, for example the risk assessment, the appointment of the occupational safety specialist or the training record.
  3. Close gaps. Complete missing mandatory documents before the questionnaire goes back. A missing appointment of the occupational safety specialist can be fixed within a few days, as the article on appointing an occupational safety specialist shows.
  4. Answer honestly. Without a certificate, tick "no" and refer in the free text to the legal organisation under ArbSchG, ASiG and DGUV Regulation 2.
  5. File the answers. Store the questionnaire, attachments and date centrally so the next questionnaire takes a fraction of the time.

The free-text answer can be short: "Occupational safety is organised under ArbSchG, ASiG and DGUV Regulation 2. An occupational safety specialist and a company physician are appointed in writing, the risk assessment is in place, and safety training takes place annually and is documented." Such a sentence only holds if the documents are actually available on request.

How to recognise audit-ready evidence

Evidence convinces a client when it is complete, dated, assigned to a responsible person, retrievable and current. The same five features decide during an inspection by the Berufsgenossenschaft whether a document counts as proof.

The article on the five features of audit-ready documentation describes them in detail. For questionnaires there is one practical addition: clients often ask for accident figures for the last three years. Anyone who records reportable accidents under § 193 SGB VII properly has this figure in minutes. How the report works is explained in the article on accidents at work in the office.

Evidence an office can hand over at any time includes the risk assessment (or a summary), the appointment certificates, the attendance lists of safety training and the minutes of the occupational safety committee for more than 20 employees. Personal data such as accident reports only go out anonymised.

Evidence with Safety Club

Safety Club provides the occupational safety specialist on site and keeps the risk assessment, appointments, training records and inspection reports digitally in the customer portal. When a supplier questionnaire arrives, the documents are in one place and can be attached. You can arrange the first conversation via the initial call, and the process is described on the service page.

From first contact to signature: five working days at most. Start of on-site support: within ten working days.

This article is a general overview and does not replace legal advice in individual cases. The current version of each provision and standard cited, together with the requirements of the respective client, is authoritative.

Frequently asked questions

Is ISO 45001 mandatory for offices?

No. ISO 45001 is a voluntary international standard for occupational health and safety management systems. What is mandatory in Germany are the duties under ArbSchG, ASiG and DGUV Regulation 2, such as the risk assessment, safety training and appointing an occupational safety specialist. A certificate becomes necessary only when a client requires it by contract.

What is the difference between ISO 45001 and OHSAS 18001?

ISO 45001 replaced the British standard OHSAS 18001 in 2018. The new standard follows the common structure of ISO management standards and puts more weight on leadership responsibility, worker participation and the context of the organisation. OHSAS certificates have expired.

How long is an ISO 45001 certificate valid?

An ISO 45001 certificate is usually valid for three years. In the two years in between, the certification body checks in surveillance audits whether the system still works. After three years a recertification audit follows.

Does an ISO 45001 certificate replace the occupational safety specialist?

No. Appointing an occupational safety specialist under § 5 ASiG and the support under DGUV Regulation 2 remain mandatory with a certificate. ISO 45001 even requires the organisation to determine and comply with its legal obligations.

Which documents does an occupational safety supplier questionnaire usually ask for?

Most often the risk assessment, the appointment of the occupational safety specialist and company physician, training records, the organisation of first aid and fire safety, and figures on reportable accidents at work. A certificate is often just one of several possible answers.

Is ISO 45001 worth it for an office with 20 employees?

Rarely. For an office with 20 employees, complete and audit-ready documentation of the legal duties is enough in most cases. A certificate pays off only when important clients make it an exclusion criterion.

Sources

Newsletter

Don't miss a post

New posts on occupational safety in the office, straight to your inbox.

Not sure what applies to your business?

In a short call we'll tell you what's required and what isn't. Clear, no sales pressure.

Get a consultation

← Back to the blog overview